Polycom WEBCOMMANDER 8 - Manual (Page 316)

Chapter 10 - Conference Templates – Full Parameters View
10-30
4. Click the Advanced tab to view/define additional conference settings.
The Conference Properties - Advanced window opens.
End time Alert
Tone Select this option to enable the End of Conference
reminder tone, which is to be played once to all the
connected participants, n minutes before the end of
the conference. The tone is embedded in the Main
Control Module's software.
Note:
If the automatic extension of the conference is
enabled for the MCU, selecting this option also
enables the automatic extension of the conference
duration for this conference. For more information
see the MGC Administrator’s Guide, Chapter 5.
Exit Tone/Roll Call
announcement Select this option to enable the Exit tone, which is
heard by all the connected participants when a
participant leaves the conference. It is embedded in
the MCU software.
Table 10-3: Basic Conference Parameters
Option Description