Designating a participant as the chairperson, Designating a participant as the chairperson -59 – Polycom WEBCOMMANDER 8 User Manual
Page 135
MGC WebCommander User’s Guide
5-59
Designating a Participant as the Chairperson
During an On Going IVR-enabled conference a participant can request to
become the conference chairperson through one of the following methods:
•
Entering the appropriate DTMF code from the participant’s DTMF-
enbabled endpoint.
•
Requesting that the Operator to change his/her status to chairperson via
the MGC Manager application. For more details, see the MGC Manager
User’s Guide Chapter 6.
Using DTMF Code during the On Going conference
The participant requests to become the conference chairperson by entering the
appropriate DTMF code from his/her DTMF-enabled endpoint. The default
DTMF code is *78.
The system requests that the participant enters his/her password to become
the chairperson. If the participant enters an incorrect password, an audio
prompt is played, indicating that the wrong password was entered and that the
participant should re-enter the Conference Chairperson password. When the
participant successfully enters his/her chairperson password, the Participant
icon changes to Chairperson.