Polycom WEBCOMMANDER 8 - Manual (Page 337)

MGC WebCommander User’s Guide
10-51
27. From the Conference menu, click Start Immediately to start the
conference, click Start At to start the conference at a later time, or from
the Conference Templates menu click Save to save it in the database for
future use.
In both cases, if the Meet Me Per Conference option is defined for the
conference or the conference is a Meeting Room and if the Allocate
Permanent Dial In Number option is enabled in the MGC Web Server
Manager Database - Web Configuration dialog box, the system displays
a message with the conference dial-in number. This is the dial-in number
that should be used by the participants connecting to the conference.
If the conference was started successfully on the MCU and the Meet Me
Per Conference option is set for the conference, the system displays the
dial-in number that should be used by the conference participants, for
ISDN/T1-CAS and H.323 participants. Prior to the conference start a
dialog box appears listing the dial-in numbers to be used by ISDN/
T1-CAS and H.323 participants.