Polycom WEBCOMMANDER 8 - Manual (Page 408)

Chapter 11 - Managing Participant Templates
11-32
Advanced T1-CAS Participant Window
The T1-CAS participant’s window differs from a ISDN, ATM or MPI
participant as participant’s connect using Audio Only.
1.
Click the Advanced tab. The Participant Properties - Advanced window
opens.
2. Define the connection parameters in Participant Properties - Advanced
tab as described in Table 11-8.
Table 11-8: Advanced Parameters for T1-CAS Participants
Option Description
Service Name Type the name of the T1-CAS Network Service that
will be used to connect the participant to the
conference exactly as it is defined in the T1-CAS
Network Services list (the system is case-sensitive).
If left blank, the default T1-CAS Network Service is
used, according to the selected Interface Type.
Sub Service
Name This field is relevant only to ISDN and T1-CAS
participants.
If a sub-service is used, type the sub-service name
exactly as it appears in the Network Service
definition.
If left blank, the default sub-service is used.