Polycom WEBCOMMANDER 8 - Manual (Page 301)

MGC WebCommander User’s Guide
10-15
Lecture Mode Select the Lecture Mode from the drop-down list:
Note: Lecturer selection is mandatory at the
reservation stage. The lecturer cannot be changed
or deleted during the On Going conference.
• None - Select this option to disable the Lecture
Mode option.
• Lecture Mode - Enables the speaker to be seen
by all other participants in full screen. While the
lecturer is speaking, the system automatically
switches between participants in a predefined
time interval, showing them sequentially on his/
her endpoint monitor.
Lecture Show - One-way communication mode
in which conference participants see and hear
the conference lecturer, however they are not
seen or heard by the lecturer (one way
communication). The participants can only audit
the conference, they are unable to visually or
verbally interact or communicate as the audio
and video channels are muted. The conference
lecturer or moderator is not able to receive any
video or audio from any of the participants during
the Lecture Show.
• When the Same Layout checkbox is
selected, Lecture Show is disabled.
• Lecture Show option is enabled only when at
least one participant (that will act as
conference lecturer) is assigned to the
conference.
• Full screen (1X1) format is the only video
layout that may be selected for Lecture
Show.
Note: Lecturer selection is mandatory at the
reservation stage. The lecturer cannot be
changed or deleted during the On Going
conference.
Table 10-3: Basic Conference Parameters
Option Description