Polycom WEBCOMMANDER 8 - Manual (Page 17)

2-1
2
Connecting to WebCommander
You can connect to the WebCommander Web site in one of two ways using:
• Windows Authentication
• WebCommander User Login name and password
Connecting to WebCommander Web Site using
Windows Authentication
The Windows Authentication mechanism allows users registered with the
network servers to access the MGC WebCommander Web site using their
Windows login name and password. To enable the Windows Authentication
working mode, the MGC Web Site (ConfSiteV8_0) must be configured
accordingly in the IIS application.
Windows users with access rights to the WebCommander Web site are
defined automatically by importing their name and password from the
Windows domain. Additional parameters are manually added to the User
definition in the Web Server Manager–Users table. For further information
see the MGC Web Manager Installation and Configuration Guide,
Configuring the MGC Web Server Manager.
To log into the WebCommander Web site using Windows
Authentication:
1.
In the Web browser, enter its URL address using the following format:
http://[server IP address]/confsiteV8_0