Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 1075
Fabric OS Command Reference
1045
53-1003131-01
sfpShow
2
Length 9u: 0 (units 100 meters)
Length 50u (OM2): 15 (units 10 meters)*
Length 50u (OM3): 0 (units 10 meters)*
Length 62.5u:7 (units 10 meters)
Length Cu: 0 (units 1 meter)
Vendor Name: FINISAR CORP.
Vendor OUI: 00:90:65
Vendor PN: FTLF8524P2BNV-BR
Vendor Rev: A
Wavelength: 850 (units nm)
Options: 0032 Loss_of_Sig,Tx_Disable
BR Max: 0
BR Min: 0
Serial No: U9D06VR
Date Code: 060327
DD Type: 0x68
Enh Options: 0xd8
Status/Ctrl: 0x82
Alarm flags[0,1] = 0x5, 0x40
Warn Flags[0,1] = 0x5, 0x40
Alarm Warn
low high low high
Temperature : Not Available
Current : Not Available
Voltage : Not Available
RX Power : Not Available
TX Power : Not Available
State transitions: 1
Last poll time : Polling has not started
To display SFP information when a new SFP is inserted in a disabled port:
switch:user> sfpshow 0
Identifier: 3 SFP
Connector: 7 LC
Transceiver: 540c404000000000 2,4,8_Gbps M5,M6 sw Short_dist
Encoding: 1 8B10B
Baud Rate: 85 (units 100 megabaud)
Length 9u: 0 (units km)
Length 9u: 0 (units 100 meters)
Length 50u: 5 (units 10 meters)
Length 62.5u:2 (units 10 meters)
Length Cu: 0 (units 1 meter)
Vendor Name: BROCADE
Vendor OUI: 00:05:1e
Vendor PN: 57-1000012-01
Vendor Rev: A
Wavelength: 850 (units nm)
Options: 003a Loss_of_Sig,Tx_Fault,Tx_Disable
BR Max: 0
BR Min: 0
Serial No: UAF109280000J24
Date Code: 090711
DD Type: 0x68
Enh Options: 0xfa
Status/Ctrl: 0x0
Alarm flags[0,1] = 0x0, 0x0
Warn Flags[0,1] = 0x0, 0x0
Alarm Warn
low high low high