Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual

Page 237

Advertising
background image

Fabric OS Command Reference

207

53-1003131-01

cryptoCfg

2

-

Encrypt existing data: disabled or enabled

-

Rekey: disabled or enabled

-

Key life: the key life span (in days)

-

Volume/Pool label: the label for the tape volume or tape pool

-

Internal EE LUN state: Encrypted, Cleartext, or Disabled (Data state is cleartext but metadata
exists on the LUN, or vice versa.)

-

Encryption algorithm: AES256-ECB (DF_compatible), AES256-GCM (native) or None
(cleartext)

-

Key ID state: Read, Write, or Key ID not applicable

-

Key ID: The Key ID (if available)

-

New LUN: Yes or No

-

Replication LUN type: Primary or Mirror

-

Tape session number: numeric value

-

Number of uncompressed blocks: numeric value

Use the --show -container -all -cfg command for configuration information on all CryptoTarget
containers in the encryption group, or specify a crypto_target_container_name for information on a
specified CTC. The display includes the following information:

Encryption group name: user-defined label

Number of containers: numeric value

For each container

-

Container name: a user-defined label

-

Type: tape or disk

-

EE node: the node WWN

-

EE slot: numeric value

-

Target: target port WWN, node WWN

-

VT: virtual target port WWN, node WWN

-

Number of hosts: numeric value

-

Configuration status: committed or defined

-

For each host: the host port WWN and the node WWN

-

For each VI: the virtual initiator port WWN and the node WWN

-

Number of LUNs: numeric value

If a rekey session is in progress while the command is run, the following additional information is
displayed:

LUN number: numeric ID

LUN type: disk, tape drive, tape medium changer, tape attached medium changer, offline/unknown,
or unsupported/other

LUN serial number (disk only): alpha-numeric ID

Encryption mode: encrypt or cleartext

Encryption format: native or DF compatible

Encrypt existing data: enabled or disabled

Rekey: enabled or disabled

LUN state: refer to the appendix in the Fabric OS Encryption Administrator's Guide

Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none

Key ID state: Rekey

Key ID: numeric identifier

Key creation time: date and time of key creation

Advertising