Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 865
Fabric OS Command Reference
835
53-1003131-01
portErrShow
2
c3-timeout tx
The number of transmit class 3 frames discarded at the transmission port due to
timeout (platform- and port-specific).
c3-timeout rx
The number of receive class 3 frames received at this port and discarded at the
transmission port due to timeout (platform- and port-specific).
pcs err
The number of Physical Coding Sublayer (PCS) block errors. This counter records
encoding violations on 10 Gbps or 16 Gbps ports.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is not supported on FCoE ports.
OPERANDS
This command has the following operand:
--help
Displays the command usage.
EXAMPLES
To display error counters for ports on a switch:
switch:admin> porterrshow
frames enc crc crc too too bad enc \
tx rx in err g_eof shrt long eof out
============================================================= \
0: 0 0 0 0 0 0 0 0 0 \
1: 2.5g 73m 0 0 0 0 0 0 1.2k \
2: 0 0 0 0 0 0 0 0 0 \
3: 0 0 0 0 0 0 0 0 667 \
disc link loss loss frjt fbsy c3-timeout pcs
c3 fail sync sig tx rx err
=============================================================
0 0 2 4 0 0 0 0 0
563.2k 0 0 0 1 0 0 415.2k 0
0 0 0 1 0 0 0 0 0
0 21 4 8 0 0 0 0 0
(output truncated)
SEE ALSO
,