Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 872
842
Fabric OS Command Reference
53-1003131-01
portLedTest
2
-npass count
Specify the number of times to perform this test. The default value is 10.
-action action
Specifies the LED color. Valid values include the following:
0
This is the default action. Cycle all Port LEDs. C3 cycles are faster than C2 cycles.
1
Turn Port status LED off.
2
Turn Port status LED amber.
3
Turn Port status LED green.
16
Not supported for C2 or C3 platforms.
17
Not supported for C2 or C3 platforms. Supported for the C3 core, and the port
status LED blinks amber.
EXAMPLES
To test port LEDs on user port 1 use the corresponding value in the "BPt" column of the bladePortMap
command (requires root permission):
switch:admin> portledtest --slot 1 -ports 213
Running portledtest ..............
WARNING:
This test should NOT be aborted in the middle. If aborted, current
blade or the switch (in-case of Pizza box) may become unusable.
Reset the blade or the switch to recover.
PASSED.
To test port LEDs on a Brocade FCoE10-24 blade using default values:
switch:admin> ceeportledtest --slot 1
Platform bladeType 74
Running ceeportledtest ..............
WARNING:
This test should NOT be aborted in the middle. If aborted, current
blade or fixed configuration switch may become unusable.
Reset the blade or the switch to recover.
PASSED.
SEE ALSO