Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 847
Fabric OS Command Reference
817
53-1003131-01
portCmd
2
To display WAN test session for a specified session:
switch:admin> portcmd --wtool 0 show
wantool-id: (0)
=========================================
State : Established
Up Time : 1m6s
Run Time : 0s
Time remaining : 0s
IP Addr (L/R) : 76.196.3.76 - 77.195.3.77
PMTUD : Disabled
Comm Rate : 5000000 Kbps (610.35 MB/s)
Tx rate : 114.06 Kbps (0.01 MB/s)
Rx rate : 102.66 Kbps (0.01 MB/s)
Tx Utilization : 0.00%
Rx Utilization : 0.00%
RTT (Min/Max) : 0.10ms/0.28ms
RTT VAR (Min/Max) : 0.09ms/0.28ms
Local Session Statistics
Tx pkts : 0
Peer Session Statistics
Rx pkts : 0
Ooo pkts : 0
Drop pkts : 0 (0.00%)
To modify a WAN test session:
switch:admin> portcmd --wtool 0 modify --bi
Operation Succeeded
To stop a WAN test session:
switch:admin> portcmd --wtool 0 stop
Operation Succeeded
SEE ALSO
,