Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 69)

Fabric OS Command Reference 39
53-1003131-01
ag
2
To remove the port group with pgid 2:
switch:admin> ag --pgremove 2
Port Group 2 has been removed successfully
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode N_Ports F_Ports
-----------------------------------------------
0 pg0 lb,mfnm 0;2 4;5;6
3 FirstFabric lb 1;3 10;11
-----------------------------------------------
To enable managed fabric name monitoring in port group 3:
switch:admin> ag --pgsetmodes 3 "mfnm"
Managed Fabric Name Monitoring mode has been \
enabled for Port Group 3
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode N_Ports F_Ports
-----------------------------------------------
0 pg0 lb,mfnm 0;2 4;5;6
3 FirstFabric lb,mfnm 1;3 10;11
-----------------------------------------------
To disable managed fabric name monitoring in port group 3:
switch:admin> ag --pgdelmodes 3 "mfnm"
Managed Fabric Name Monitoring mode has been disabled for Port Group 3
switch:admin> ag --pgshow
-----------------------------------------------
0 pg0 lb,mfnm 0;2 4;5;6
3 FirstFabric lb 1;3 10;11
-----------------------------------------------
To get the current fabric name monitoring timeout value:
switch:admin> ag --pgfnmtov
Fabric Name Monitoring TOV: 120 seconds
To set the fabric name monitoring timeout value to 30 seconds:
switch:admin> ag --pgfnmtov 30
AG Preferred port information commands
To display preferred port settings for F_Ports:
switch:admin> ag --prefshow
F_Ports Preferred N_Port
------------------------------------------
10;11 0
12;13 1
4;6 2
7;8;9 3
------------------------------------------