Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 64)

34 Fabric OS Command Reference
53-1003131-01
ag
2
N-Port F-Port
----------------------------------------------
0 None
1 None
2 None
3 None
8 None
9 None
10 None
11 None
---------------------------------------------
To display the current Access Gateway mode:
switch:admin> ag --modeshow
Access Gateway mode is enabled.
switch:admin> ag --modeshow
Access Gateway mode is NOT enabled.
AG group policy commands
To show current policies:
switch:admin> ag --policyshow
AG Policy Policy Name State
-----------------------------------------------------
Port Grouping pg Enabled
Auto Port Configuration auto Disabled
Advanced Device Security ads Disabled
WWN Based Load Balancing wwnloadbalance Disabled
-----------------------------------------------------
To enable a port grouping policy:
switch:admin> ag --policyenable pg
To disable a port grouping policy
switch:admin> ag --policydisable pg
To enable auto port configuration policy when both policies are disabled and the switch is already
disabled:
switch:admin> ag --policyenable auto
All Port related Access Gateway configurations will be lost.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
To disable auto port configuration policy when the switch is disabled:
switch:admin> ag --policydisable auto
Default factory settings will be restored.
Default mappings will come into effect.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
Access Gateway configuration has been restored \
to factory default
To enable the ADS policy:
switch:admin> ag --policyenable ads