Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 282
252
Fabric OS Command Reference
53-1003131-01
dlsSet
2
E-port Balance Priority is not set
switch:admin> dlsset --enable -lossless
DLS and Lossless are set
switch:admin> dlsshow
DLS is set with Lossless enabled
switch:admin> dlsset
Lossless is set (unchanged)
switch:admin> dlsset --disable -lossless
Lossless is not set
switch:admin> dlsshow
DLS is not set
E-port Balance Priority is not set
To attempt to enable Lossless while XISL use is enabled:
switch:admin> dlsset --enable -lossless
Lossless option cannot be enabled when XISL use is allowed.
Please disable the switch with 'switchdisable' and run \
'configure' to disallow XISL use before enabling Lossless.
To enable the E_Port Balance Priority:
switch:admin> dlsset --enable -eportbal
E-port Balance Priority is set
To disable the E_Port Balance Priority:
switch:admin> dlsset --disable -eportbal
E-port Balance Priority is not set
To rebalance the E_Port load on a switch:
switch:admin> dlsset --rebalance
Route rebalance successful
To rebalance the E_Port load on all switches:
switch:admin> dlsset --rebalance -all
Route rebalance all successful
SEE ALSO
,