Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 238)

208 Fabric OS Command Reference
53-1003131-01
cryptoCfg
2
•
Key life (in days); number of days until expiration
• Rekey status: numeric value
• Key expiration time
• Rekey session number: numeric value
•
Percentage complete
•
Rekey state: Read or write Phase
• Rekey role: primary, alternate
• Block size: numeric value
• Number of blocks: numeric value
• Current logical block address (LBA) being processed
Use the --show -tapepool command to display tape pool configuration parameters for all Tape pools or
for a specific tape pool. For each tape pool, the display includes the following information:
•
tape pool Label: user-define label
•
Key Life: Life span in days
•
Encryption mode: encrypt or cleartext
• Encryption format: native or DF compatible
• Configuration status: committed or defined
Use the --show -LUN command for a listing of Crypto LUN status or configuration information for a
specific CTC.
When used with -stat the display includes the following LUN runtime status information:
• Container name: user-defined label
•
Type: disk or tape
•
EE node: node WWN
•
EE slot: EE slot number
• Target: target port WWN and node WWN
• Target PID
• VT: virtual target port WWN and node WWN
•
VT PID: virtual target PID
•
Number of hosts: numeric value
• Number of rekey (or tape) sessions: numeric value
• For each host:
- Host PWWN, NWWN: host port WWN and node WWN
- Host PID: host port ID
-
VI PWWN, NWWN: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator port ID
• Number of LUNs: numeric value
• For each LUN:
- LUN number: numeric value
-
LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
-
LUN serial number: alpha-numeric ID
-
Encryption mode: encrypt or cleartext
- Encryption format: native or DF-compatible
- Encrypt existing data: enabled or disabled
- Rekey: enabled or disabled