Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 606
576
Fabric OS Command Reference
53-1003131-01
lsDbShow
2
NOTES
Beginning Fabric OS v7.3.0, the output displays only the lines with a bit set. If a port bitmap does not
have any bits set, the output displays as "None" for the first line of the bitmap.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
domain
Specifies the domain ID of the LSR to be displayed. This operand is optional; if
omitted, the entire link state database is displayed.
EXAMPLES
To display the link state record for a switch:
switch:admin> lsdbshow 1
Domain = 1 (self), Link State Database Entry pointer = 0x1096da60
lsrP = 0x109784b0
earlyAccLSRs = 0
ignoredLSRs = 0
lastIgnored = Never
installTime = Aug 26 18:20:41.451
lseFlags = 0xa
uAllOutIfsP[4] = 0x00000001
uPathCost = 0
uOldHopCount = 0
uHopsFromRoot = 0
uPathCount = 1
mOutIfsP[0] = 0x10000000
parent = 0xf0
mPathCost = 0
mHopsFromRoot = 0
Link State Record:
Link State Record pointer = 0x109784b0
lsAge = 321
reserved = 0
type = 1
options = 0x0
lsId = 1
advertiser = 1
incarn = 0x80000185
length = 60
chksum = 0x168a
linkCnt = 2, flags = 0x0
LinkId = 91, out port = 28, rem port = 28, cost = 500, bw = 16G, type = 1
LinkId = 91, out port = 29, rem port = 29, cost = 500, bw = 48G, type = 1
SEE ALSO
,