Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 942)

912 Fabric OS Command Reference
53-1003131-01
portShow
2
RecvQ Next: 0x30acd15a Min: 0x30acd15a Max: 0x31ecd15a
Out Of Sequence Pkts: 0, HWM 0, Total 0
Keepalive:
Keepalive Timeout: 60 s
Keepalive Interval: 15 s
Inactivity: 120 s
(output truncated)
To display IPSec parameters on an IPSec-enabled tunnel:
switch:admin> portshow fciptunnel 17 -i
-------------------------------------------
Tunnel ID: 17
Tunnel Description:
Admin Status: Enabled
Oper Status: Empty
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Enabled
IPSec Key: '01234567890123456789012345678901'
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:c3:f0:16
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 0
Flags: 0x00000000
FICON: Off
To display the FCIP tunnel hierarchy on the Brocade FX8-24:
switch:admin> portshow fciptunnel 1/12--hier
FCIP Tunnel 1/12
| High Level Tunnel Stats:
| Operational Status: Up
| Connected Count: 1
| Max Comm Rate: 2500000
| Compression Ratio: 1 : 1
| Compressed Bytes: 0
| Uncompressed Bytes: 0
| Bytes In: 68942140
| Bytes In Avg: 85
| Bytes Out: 30983544
| Bytes Out Avg: 16
| Packets In: 92126
| Packets In Avg: 0
| Packets Out: 70728
| Packets Out Avg: 0
| Aggregate TCP Stats:
| TCP Bytes In: 842506236
| TCP Bytes Out: 1446465008
| TCP Packets In: 16072571
| TCP Packets Out: 16063156
| Retransmits: 0
| Longest RTT: 0 ms
| Out Of Sequence: 0
| Slow Starts: 0
| Circuit Count: 2
| TCP Count: 24