Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 926
896
Fabric OS Command Reference
53-1003131-01
portShow
2
2002:2050::112
2002:2055::143 55 0 APP
2002:2055::1
2002:2055::143 55 0 Perm
2002:2050::112
To display the auto-negotiation of 1GbE port:
switch:admin> portshow autoneg 1/ge2
Auto-Negotiation Configuration:
Port: 1/ge2
Auto-Negotiate: Enabled
To display the IPSEC policy for a Brocade 7840 switch:
switch:admin> portshow portshow ipsec-policy --ike
IPSec Policy Key
IKE-ID Oper Flg Local-Addr Remote-Addr IKE Rekey ESP Rekey
-------------------------------------------------------------------------
policy1 123456789012
dp0.0 UP R 192.168.0.20 192.168.0.120 - - - -
dp0.1 UP I 192.168.0.20 192.168.0.121 2h44m4s 0 3h41m1s 1
dp1.0 UP I 192.168.0.21 192.168.0.120 2h43m58s 0 41m16s 0
-------------------------------------------------------------------------
Flags: *=Name Truncated I=Initiator R=Responder
FUNCTION
Display FCIP tunnels, circuits, management interfaces and FICON statistics on the Brocade 7800,
7840, or FX8-24 platforms:
SYNOPSIS
portshow option [all | [slot/]ve_port]] arguments [optional_arguments]
DESCRIPTION
Use this command to display configuration parameters and status information for FCIP tunnels and FCIP
circuits on the GbE/10GbE ports on the Brocade 7800, Brocade 7840, and FX8-24 platforms. The FCIP
tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local and
remote fabrics. The following display options are supported on these platforms:
•
portShow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels including the following:
-
Additional performance information
-
FICON configuration parameters
-
IPSec status (enabled or disabled), mode (legacy if configured) and key
-
Circuits with the tunnel
-
QoS statistics including performance for each priority
-
FCIP Tunnel hierarchy listing circuit IDs and TCP connection information for the tunnel
•
portShow fcipcircuit - Displays status and configuration for FCIP circuits:
-
TCP statistics for the circuit
-
Circuit-level VLAN tagging configuration
-
Circuit-level Differentiated Services (DSCP) markings
•
portshow mgmtif - Displays the inband management interfaces.
•
portshow mgmtroute- Displays the routes for the inband management interfaces.
•
portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions.