Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 215)

Fabric OS Command Reference 185
53-1003131-01
cryptoCfg
2
To display the key vault diagnostics configuration:
switch:admin> cryptocfg --kvdiag -show
Key vault diagnostic periodic tests Enabled
Interval: 5 minute(s)
Test Type: (diag) key retrieval/archival readiness
Operation succeeded
To change the interval at which the key vault diagnostics is run:
switch:admin> cryptocfg --kvdiag -interval 60
Key vault diagnostic periodic tests Enabled
Interval: 60 minute(s)
Test Type: (diag) key retrieval/archival readiness
Operation succeeded
FUNCTION
2. Encryption group configuration
SYNOPSIS
cryptocfg --help -groupcfg
cryptocfg --create -encgroup encryption_group_name
cryptocfg --delete -encgroup encryption_group_name
cryptocfg --reg -keyvault cert_label certfile hostname |
ip_address primary | secondary
cryptocfg --dereg -keyvault cert_label
cryptocfg --reg -KACcert signed_certfile primary | secondary
cryptocfg --set -keyvault LKM | DPM | SKM | TEKA | TKLM | KMIP
cryptocfg --set -kvparam ha transparent | opaque | disable
cryptocfg --set -kvparam login disable | enableU | enableP
cryptocfg --set -kvparam cert self | ca
cryptocfg --set -kvparam loglevel error | warning | info | io | debug | trace
cryptocfg --show -kvparam
cryptocfg --set -failbackmode auto | manual
cryptocfg --set -hbmisses value
cryptocfg --set -hbtimeout value
cryptocfg --set -quorumsize value
cryptocfg --set -systemcard enable | disable
cryptocfg --set -replication enable | disable
cryptocfg --add -membernode node_WWN
cryptocfg --eject -membernode node_WWN