Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual
Page 537
Fabric OS Command Reference
507
53-1003131-01
ipAddrSet
2
To enable DHCPv6 on a device:
switch:admin> ipaddrset -ipv6 -dhcpv6
To clear all IP address information on a management interface and verify the changes:
switch:admin> ipaddrset --clear
Warning: All management interface will be closed, \
which will result in all network connections \
being terminated.
Please initiate a connection to the serial console of \
the switch to configure the management interface.
Would you like to continue with clearing the IP \
configuration?(y/n)y
switch:admin> ipaddrshow
CHASSIS
Ethernet IP Address: none
Ethernet Subnetmask: none
CP0
Ethernet IP Address: none
Ethernet Subnetmask: none
Host Name: cp0
Gateway IP Address: none
CP1
Ethernet IP Address: none
Ethernet Subnetmask: none
Host Name: cp1
Gateway IP Address: none
SEE ALSO