Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 952)

922 Fabric OS Command Reference
53-1003131-01
portShow
2
PMTU : Disabled
Failover Group : 0
VLAN-ID : NONE
L2Cos (f/h/m/l) : 0/0/0/0
DSCP (f/h/m/l) : 0/0/0/0
cfgmask : 0x00003c2f 0x40000000
Flow Status : 1
ConCount/Duration : 0 / 0s
Receiver Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
Sender Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
TCP Bytes In/Out : 0 / 0
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0
RTT (min/avg/max) : 0 / 0 / 0 ms
Circuit 24.1 (dp:0)
====================================================
Admin/Oper State : Enabled / In Progress
Flags : 0x00000000
IP Addr (L/R) : 192.168.3.20 ge3 - 192.168.3.10
HA IP Addr (L/R) : 192.168.3.21 ge3 - 192.168.3.11
Configured Comm Rates: 2500000 / 5000000 kbps
Peer Comm Rates : 0 / 0 kbps
Actual Comm Rates : 2500000 / 5000000 kbps
Keepalive Timeout : 6000 ms
Metric : 0
Connection Type : Default
ARL-Type : Auto
PMTU : Disabled
Failover Group : 0
VLAN-ID : NONE
L2Cos (f/h/m/l) : 0/0/0/0
DSCP (f/h/m/l) : 0/0/0/0
cfgmask : 0x00003c2f 0x40000000
Flow Status : 1
ConCount/Duration : 0 / 0s
Receiver Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
Sender Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
TCP Bytes In/Out : 0 / 0
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0
RTT (min/avg/max) : 0 / 0 / 0 ms
To display the inband management interface for all GbE Ports on a Brocade 7800:
switch:admin> portshow mgmtif all
Inband Management: ge0 Enabled
Interface IPv4 Address NetMask Effective MTU Flags
--------------------------------------------------------------
0 20.20.0.151 255.255.255.0 1500
Inband Management: ge1 Enabled
Interface IPv4 Address NetMask Effective MTU Flags
--------------------------------------------------------------
0 20.20.1.151 255.255.255.0 1500
Inband Management: ge2 Enabled