Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 656)

626 Fabric OS Command Reference
53-1003131-01
nsCamShow
2
Virtual
The device is contrived by the switch.
NPV
The device is connected to the NX_Port, using FDISC to log in to the switch.
iSCSI
Device is connected to the iSCSI port.
iSCSI
The second attribute indicates the role of the device. Valid role attributes include
the following:
Unknown (initiator/target)
Device role is not detected
Initiator
An iSCSI initiator.
Target
An iSCSI target.
Initiator+Target
Both an iSCSI initiator and an iSCSI target.
EXAMPLES
To display all switch and device entries discovered by the Name Server in the fabric:
switch:user> nscamshow
nscam show for remote switches:
Switch entry for 92
state rev owner cap_available
known v640 0xfffc23 1
Device list: count 8
Type Pid COS PortName NodeName
N 5c1000; 3;23:06:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:06;
FC4s: FCP
PortSymb: [45] "Brocade VDPC Entity-Slot#00,DPC#00,Entity#03."
Fabric Port Name: 20:10:00:05:1e:53:e3:8a
Permanent Port Name: 23:06:00:05:1e:53:e3:8a
Port Index: 16
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
N 5c1200;3;23:04:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:04;
FC4s: FCP
PortSymb: [45] "Brocade VDPC Entity-Slot#00,DPC#00,Entity#02."
Fabric Port Name: 20:12:00:05:1e:53:e3:8a
Permanent Port Name: 23:04:00:05:1e:53:e3:8a
Port Index: 18
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
Port Properties: SIM Port
N 5c1300; 3;23:02:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:02;
FC4s: FCP
PortSymb: [45] "Brocade VDPC Entity-Slot#00,DPC#00,Entity#01."
Fabric Port Name: 20:13:00:05:1e:53:e3:8a
Permanent Port Name: 23:02:00:05:1e:53:e3:8a
Port Index: 19
Share Area: No
Device Shared in Other AD: No