Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1187)

Fabric OS Command Reference 1157
53-1003131-01
thConfig
2
EXAMPLES
To set custom thresholds for the SFP class and temperature area for a 16G QSFP on a DC X8510-8:
switch:admin> thconfig --set sfp -area temp -sfptype qsfp \
-highth -value 32 -trigger above -action email
switch:admin> thconfig --set sfp -area temp -sfptype qsfp\
lowth -value 0 -trigger above -action raslog
To apply the new custom settings so they become effective:
switch:admin> thconfig --apply sfp -area temp -sfptype qsfp \
-action cust -thresh_level cust
To set high thresholds for the security class and login violation area with SNMP alerts and save the
thresholds nonpersistently:
switch:admin> thconfig --set security -area lv \
-highth-value 0 -trigger above \
-action snmp -nosave
switch:admin> thconfig --set security -area lv \
-highth -value 0 -trigger below \ \
-action none -nosave
To cancel the custom settings that have previously been saved nonpersistently.
switch:admin> thconfig --cancel security -area lv \
-action cust -thresh_level cust
To display the Fabric Watch configuration for the QSFP temperature on a DCX 8510-8:
switch:admin> thconfig --show sfp -area temp -sfptype qsfp
Class: SFP
SFP TYPE: QSFP
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
TimeBase: None
Value : 85
Trigger : Above Action: Raslog
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value : 85
Trigger : Above Action: Raslog
Trigger : Below Action: Raslog
Low:
Custom:
TimeBase: None
Value : -5
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value : -5
Trigger : Below Action: Raslog