Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 918)

888 Fabric OS Command Reference
53-1003131-01
portShow
2
2_parity_err
Secondary transmission parity errors.
CMI_bus_err
Control message interface errors.
The second column displays link error status block counters.
The third column shows the number of F_RJTs and F_BSYs generated. For L_Ports, the third column
also displays the number of loop initialization protocols (LIPs) received, number of LIPs transmitted, and
the last LIP received.
OPERANDS
This command has the following port operands:
slot
For bladed systems only, specifies the slot number of the port to be displayed,
followed by a slash (/).
port
Specifies the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a listing of valid port numbers.
-link [-force]
Displays the diagnostic information from cached data for a local switch port and
the peer port. The -force option displays the real-time diagnostic information from
the registers for a port.
-i index1[-index2]
Specifies a port or a range of ports identified by port index numbers. You can
specify multiple index ranges separated by a space, for example, 33-38 40-60.
Port indexes are supported only if PortSwap is disabled. They are not supported
on GbE ports and configured F_Port trunks. Use the -i option without a port index
argument to display the portSwap status, or alternately use portSwapShow.
-x [hex1 [-hex2]]
Specifies a port or a range of ports identified by port numbers, index number in
hexadecimal format. You may specify multiple port ranges separated by a space,
for example, -x 21-26 28-3c.
-pid pid
Specifies the diagnostics information of a remote switch port along with its peer
port.
EXAMPLES
To display the current state of a D_Port:
switch:admin> portshow 28
portName: port28
portHealth: No Fabric Watch License
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x10004103 PRESENT ACTIVE E_PORT \
G_PORT D_PORT U_PORT LOGIN LED
LocalSwcFlags: 0x0
portType: 24.0
POD Port: Port is licensed
portState: 1 Online
Protocol: FC
portPhys: 6 In_Sync portScn: 0 Flow control mode 4
port generation number: 0
state transition count: 1