Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1175)

Fabric OS Command Reference 1145
53-1003131-01
sysMonitor
2
--show cpu | mem
Displays system memory or CPU usage.
--help
Displays the command usage.
EXAMPLES
To configure Fabric Watch custom thresholds for temperature:
switch:admin> sysmonitor --config env -area temp \
-highthreshold -value 99 -trigger above -action raslog
To apply the custom thresholds for temperature:
switch:admin> sysMonitor --apply env -area temp \
-action_level cust -thresh_level cust
To configure Fabric Watch custom thresholds for temperature using high and low thresholds and save
the configuration nonpersistently:
switch:admin> sysmonitor --config env -area temp \
-highthreshold -value 99 -trigger above -action email \
-lowthreshold -value 32 -trigger below -action email
To apply the custom thresholds for temperature:
switch:admin> sysmonitor --apply env -area temp \
-action_level cust -thresh_level cust
To cancel the previously configured thresholds for temperature:
switch:admin> sysmonitor --cancel env -area temp \
-action_level cust -thresh_level cust
To display the Fabric Watch configuration for temperature:
switch:admin> sysmonitor --show env -area temp
Class: ENV
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
Low:
Custom:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP