Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 931)

Fabric OS Command Reference 901
53-1003131-01
portShow
2
-printperf
Starts the emulated Printer performance monitor or displays the performance
statistics.
-xrcperf
Starts the emulated XRC performance monitor or displays the performance
statistics.
-structs
Displays FICON control block sizes.
-emul
Displays comprehensive FICON emulation statistics. Use one of the following
options to display emulation statistics about a specific component.
-emulxrc
Displays FICON XRC emulation statistics.
-emultape
Displays FICON Tape emulation statistics.
-emultera
Displays FICON Teradata emulation statistics.
-emulprint
Displays FICON Printer emulation statistics.
-act
Displays the current Active Exchange information.
options
The following additional option is supported.
-clear
Resets the specified statistics. This operand is optional; it requires a
preceding command.
-mem adrs length
Specifies the SE memory length in words to display. The valid range for length is 0
to 1024.
-dram2
Display the current usage of the dynamic memory allocator.
-pools
Display the current free pool allocation (FPA) buffer usage.
-tcb
Displays tunnel statistics.
-drshow
Displays the current Descriptor Ring status
-smem
Displays the current Shadow Memory data.
-rte
Displays the current Routing Info SE memory.
EXAMPLES
To display FCIP tunnel configuration parameters on the Brocade 7800 with Ficon enabled:
switch:admin> portshow fciptunnel 16
-------------------------------------------
Tunnel ID: 16
Tunnel Description:
Admin Status: Enabled
Oper Status: Up