Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 916)

886 Fabric OS Command Reference
53-1003131-01
portShow
2
Lock_Ref
Locking to the reference signal.
portScn
The port's last State Change Notification.
port generation number
The port's generation number for the last offline state change.
portId
The port's 24-bit port ID.
portIfId
The user port's interface ID.
portWwn
The port's world wide name.
portWwn of devices(s) connected
The World Wide Port Names of connected devices. If the base device logs out
and one or more NPIVs are online, the PWWN of the NPIVs online are displayed.
Distance
The port's long-distance level. In the case of LD mode, the user configured
distance and actual distance also are displayed. See portCfgLongDistance for
information on long distance levels.
Port part of other AD
Yes or No.
portSpeed
The port's fixed speed (1, 2, 4, or 8 Gbps) or negotiated speed (N1 Gbps, N2
Gbps, N4 Gbps, N8 Gbps or AN).
FEC
Forward error correction (FEC) status: displays "active" if FEC is enabled on the
port and the port is online; displays "inactive" if the feature is disabled. Refer to the
portCfgFec command for more information.
LE domain
The LE domain ID.
FC FastWrite
The status of FC FastWrite (ON or OFF) (Deprecated).
If the port is configured as an EX_Port, the following additional port information is displayed:
EX_Port Mode
The port is configured as an EX_Port.
Fabric ID
The fabric ID assigned to this EX_Port; this is the fabric ID of the edge fabric
attached to this EX_Port.
Front Phantom
Information on the front phantom domain presented by this EX_Port. Includes the
preferred (if not active) or actual (if active) domain ID for the front domain and the
WWN of the front domain.
Pr Switch Info
Information on the principal switch of the edge fabric attached to this EX_Port.
Includes the domain ID and WWN of the principal switch.