Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 72)

42 Fabric OS Command Reference
53-1003131-01
ag
2
To create a WWN to port group mapping for all currently mapped devices (this command does not affect
devices not already mapped or connecting later).
switch:admin> ag --addwwnpgmapping 4 --all
To add port 13 as a preferred failover N_Port for a device:
switch:admin> ag --addwwnfailovermapping 13 "0:12:00:05:1e:85:92:88"
To disable all WWN mappings:
switch:admin> ag --wwnmappingdisable --all
To display the WWN mappings when WWN load balancing policy is not enabled:
switch:admin> ag --wwnmapshow
Static Device Mapping Information:
WWN, 1st N_Port 2nd N_Port PG_ID Current Enabled
----------------------------------------------------------
25:f7:00:0c:29:00:02:8b 9 None None None yes
25:f7:00:0c:29:00:03:8b 9 None None None yes
25:f7:00:0c:29:00:04:8b 9 None None None yes
25:f7:00:0c:29:00:05:8b 9 None None None yes
25:f7:00:0c:29:00:07:8b 9 None None None yes
25:f7:00:0c:29:00:08:8b 9 None None None yes
25:f7:00:0c:29:00:09:8b 9 None None None yes
25:f7:00:0c:29:00:0a:8b 9 None None None yes
----------------------------------------------------------
Dynamic Device Mapping Information:
----------------------------------------------------------
No dynamic mappings in use
----------------------------------------------------------
To display the WWN mappings when WWN load balancing policy is enabled:
switch:admin> ag --wwnmapshow
Static Device Mapping Information:
WWN, 1st N_Port 2nd N_Port PG_ID Current Enabled
----------------------------------------------------------
No static mappings are defined
----------------------------------------------------------
Dynamic Device Mapping Information:
WWN, 1st N_Port 2nd N_Port PG_ID Current Enabled
-----------------------------------------------------------
10:00:00:06:2b:11:52:df 23 None 0 23 yes
-----------------------------------------------------------
To configure and display the reliability counter for the preferred N_Port:
switch:admin> ag --reliabilitycounterset 50
switch:admin> ag --reliabilitycountershow
================================
Reliability Counter = 50
================================