Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual

Page 946

Advertising
background image

916

Fabric OS Command Reference

53-1003131-01

portShow

2

1/22 - High 2d23h11m 0.00 0.00 0.00 0.00

1/22 - Medium 2d23h11m 0.00 0.00 0.00 0.00

1/22 - Low 2d23h11m 0.00 0.00 0.00 0.00

1/22 0 1/xge0 - 2d23h11m 0.00 0.00 0.00 0.00

1/22 0 1/xge0 F-Class 2d23h11m 0.00 0.00 0.00 0.00

1/22 0 1/xge0 Medium 2d23h11m 0.00 0.00 0.00 0.00

1/22 0 1/xge0 Low 2d23h11m 0.00 0.00 0.00 0.00

1/22 1 1/xge1 - 2d23h11m 0.00 0.00 0.00 0.00

1/22 1 1/xge1 F-Class 2d23h11m 0.00 0.00 0.00 0.00

1/22 1 1/xge1 High 2d23h11m 0.00 0.00 0.00 0.00

1/22 1 1/xge1 Medium 2d23h11m 0.00 0.00 0.00 0.00

1/22 1 1/xge1 Low 2d23h11m 0.00 0.00 0.00 0.00

-------------------------------------------------------------------

To display the IP addresses configured for the circuits on the Brocade FX8-24:

switch:admin> portshow fciptunnel --circuit --config

Tunnel Circuit AdminSt Flags Local IP Remote Ip

-----------------------------------------------------------------------------

---

8/12 - Enabled -------

8/12 0 8/xge1 Enabled ---4--s 192.168.0.16 192.168.0.116

8/24 - Enabled -------

8/24 0 8/xge0 Enabled ---4--s 192.168.0.11 192.168.0.111

-----------------------------------------------------------------------------

---

Flags (tunnel): c=compression m=moderate compression a=aggressive compression

A=Auto compression f=fastwrite t=Tapepipelining F=FICON

T=TPerf i=IPSec l=IPSec Legacy

(circuit): s=sack v=VLAN Tagged x=crossport 4=IPv4 6=IPv6

L=Listener I=Initiator

To display all FCIP circuits on the Brocade FX8-24:

switch:admin> portshow fcipcircuit all

------------------------------------------------------------------------

Tunnel Circuit OpStatus Flags Uptime TxMBps RxMBps ConnCnt CommRt Met/G

------------------------------------------------------------------------

1/12 0 1/xge1 Up ---4--s 3d2m 000 0.00 1 2500/2500 0/-

1/12 1 1/xge0 Up ---4-xs 3d2m 0.00 0.00 1 2500/2500 1/-

1/21 0 1/xge1 Up ---4--s 3d1m 0.00 0.00 1 2500/2500 0/-

1/21 1 1/xge0 Up ---4-xs 3d2m 0.00 0.00 1 2500/2500 1/-

1/22 0 1/xge0 Up ---4--s 3d1m 0.00 0.00 1 2500/2500 0/-

1/22 1 1/xge1 Up ---4-xs 3d2m 0.00 0.00 1 2500/2500 1/-

1/31 0 1/xge0 Up ---4--s 3d2m 0.00 0.00 1 2500/2500 0/-

1/31 1 1/xge1 Up ---4-xs 3d2m 0.00 0.00 1 2500/2500 1/-

------------------------------------------------------------------------

Flags:circuit:s=sack v=VLAN Tagged x=crossport 4=IPv4 6=IPv6

T=Test(CPerf) L=Listener I=Initiator

To display the details for all FCIP circuits on the Brocade FX8-24 (Note that both circuits are configured
as initiators):

switch:admin> portshow fcipcircuit all --detail

-------------------------------------------

Circuit ID: 1/12.0

Circuit Num: 0

Admin Status: Enabled

Oper Status: Up

Connection Type: Initiator

Advertising
Popular Brands
Popular manuals