Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1197)

Fabric OS Command Reference 1167
53-1003131-01
traceDump
2
-r
Clears the status of a particular trace dump on a specified slot.
-R
Clears the status of a particular trace dump on all slots.
-c
Clears all trace dump buffers. This operation resets the trace buffer contents.
-s slot
Specifies the slot number from which a trace dump is generated. If a slot is not
supplied, the trace dump is generated from the local slot. This operand is optional.
EXAMPLES
To initiate a background trace dump from slot 5:
switch:admin> tracedump -n -s 5
To clear the status of a trace dump:
switch:admin> tracedump -R
trace dump removed
To clear the content of the trace dump buffer:
switch:admin> tracedump -c
Cleared Trace Buffer contents
SEE ALSO
supportFtp , supportSave , supportShow