LumaSense Technologies INNOVA 1314i User Manual
Page 28
Chapter 3
______________________________________________________________________
_____________________________________________________________________________
BE6030-13
1314i Photoacoustic Gas Monitor
LumaSense Technologies A/S
Page 28 of 199
The structure of the monitor set-up can be viewed like an inverted
tree. The main branches divide and separate into minor branches.
These in turn divide again and again.
To move through the tree, the branches are selected using the
“select” push-buttons (see
). Use the Set-up Tree,
supplied with the monitor and the example steps below to see how
the instructions progress. Starting from the initial screen display.
1. Press SET-UP, and the text changes to that displayed below.
2. To select the MEASUREMENT branch, press S1. (Pressing either
of the other “select” push-buttons will take you along another
branch of the set-up tree. The following text is displayed.
3. To select the ENVIRONMENT branch, press S3. The text is
displayed.
CURRENT TIME IS 2014-06-13 17:12
MONITOR IS READY FOR USE
SELECT SET-UP BRANCH
MEASUREMENT FORMAT CONFIGURATION
SELECT SET-UP BRANCH
MONITORING TASK ENVIRONMENT
SELECT FLUSHING MODE
AUTO FIXED TIME