LumaSense Technologies INNOVA 1314i - Manual (Page 36)

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 36 of 199
The following screen picture appears:
Dates are entered as the Year-Month-Day, for example the 19 th April,
2014 has to be entered as 2014-04-19.
4. To change the date, press
¿ .
5. Use the direction keys to enter the correct date.
Note: press S1 to revert back to the original date.
6. Press
¿ to accept date.
This causes the text on the display screen to change to the
following:
7. To change the time, press ¿ .
8. Use the direction keys to enter the correct time. If you make a
mistake in entering the correct date just press S1 and start again.
The current time is entered as the time read on a 24-hour digital
clock. For example, 13:45 is 15 minutes to 2 o’clock in the afternoon.
9. Press
¿ to accept time.
When this step is completed, the display then moves to the previous
head of the Set-Up Tree.
10. Press ▲ three times and follow the path you take en route
through the Set-Up Tree.
The screen display shows the following text:
CURRENT DATE 2014-04-19
PRESS ENTER TO CHANGE VALUE
CURRENT TIME 12:00
PRESS ENTER TO CHANGE VALUE