LumaSense Technologies INNOVA 1314i - Manual (Page 49)

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 49 of 199
DATA IN DISPLAY MEMORY RECORDED FROM
2014-01-16 09:50 TO 2011-01-16 10:04
4. Press u.
This causes the following text to appear on the screen:
WATER VAPOUR MEASURED
Use q to scroll through the following screen displays:
MONITORING PERIOD IS NOT PRE-SET
WATER: MAX 8.55E+00 m 8.15+00
MIN 7.01E+00 s 816E-03
W: WATER VAPOUR: 971.88mBar
2014-01-16 09:50:32 _________ 7.39Tdew
W: WATER VAPOUR: 971.88mBar
2014-01-16 09:51:33 ________ 7.49Tdew
5. Press u.
This causes the display to jump over to the list of measurement
results for gas A. The following text appears:
A:
(the name of the gas being measure by Filter A will appear here)
972.06 mBar
2014-01-16 09:51:33 ___________ 7.43 mg/m3
By using p and q you can now scroll through the list of
measurement results for gas A.
If you do not wish to view the results anymore, press
¿ , this acts as
a “go to head” function. The following text appears:
A: 7.42E+00 B:__________ C:___________
D: _________ E:__________ W: 8.13+00