LumaSense Technologies INNOVA 1314i - Manual (Page 40)

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 40 of 199
f. Use the direction keys to define the normalization temperature: ▲
and ▼ to increase and decrease the numbers, respectively; t and
u
to move the cursor across the fields.
g. Press
¿ to select displayed temperature.
The display screen then jumps to the “head” of the MEASUREMENT
branch of the Set-Up Tree and the following text is shown:
Fixed Time Option
a. Press S3, and the screen displays the following text.
b. Press
¿ .
c. Use the direction keys to define the chamber flushing time.
Note: the range of acceptable values for chamber flushing ranges
from 2s to 60s, increasing in 1s intervals.
d. Press
¿ to select displayed flushing time, and the following text is
displayed.
e. Press S3 to enable sample tube flushing. The screen displays the
following text.
SELECT MEASUREMENT SET-UP BRANCH
MONITORING TASK ENVIRONMENT
CHAMBER FLUSHING TIME 8 s
PRESS ENTER TO CHANGE VALUE
TUBE FLUSHING ?
NO YES