SkyTrak 8042 Service Manual - Manual (Page 381)

Engine: Cummins QSB4.5T
7B.14 Model 8042, 10042, 10054 Legacy Rev. 10/03
9. Loosen the radiator side clamp (1) on the radiator
input (upper) hose (2). Work the hose off the
radiator (3). Position the hose out of the way to allow
radiator removal, or remove the hose from the
engine. Inspect the hose, and replace if necessary.
Loosen clamp (4) on the radiator return (lower) hose
(5). Work the hose off the radiator. Position the hose
out of the way to allow radiator removal, or remove
the hose from the engine. Inspect the hose, and
replace if necessary.
10. Disconnect and cap the hydraulic oil cooler inlet (6)
and outlet (7) hoses. Place a suitable container
below the fittings to catch any oil that may drain from
the radiator.
11. Disconnect and cap the inlet (8) and outlet (9) fittings
from the transmission oil cooler.
MH4770
1
2
3
4
5
6
7
MH4790
MH4800
8
9