SkyTrak 8042 Service Manual - Manual (Page 383)

Engine: Cummins QSB4.5T
7B.16 Model 8042, 10042, 10054 Legacy Rev. 10/03
12. Working at the back of vehicle, remove the
capscrews (1) and lockwashers (2) securing the
transmission oil cooler (3) to the hinges (4), and the
capscrews (5) and washers (6) securing the other
side of the transmission oil cooler to the weldnuts on
the frame assembly (7).
13. Remove the fan shroud (8), fan shroud spacer (9),
hydraulic oil cooler (10), frame assembly (7) and
radiator (11) as a unit, by removing capscrews
(12 and 13), washers (14 and 15), isolators (16) and
locknuts (17).
14. Disassemble the fan shroud (8) from the fan shroud
spacer (9), by removing capscrews (18 and 19),
lockwasher (20) and washers (21 and 22).
15. Disassemble the fan shroud spacer (9) from the
frame assembly (7), by removing capscrews (23)
and washers (24).
16. Disassemble the hydraulic oil cooler (10) from the
frame assembly (7) by removing the capscrews (25)
and washers (26).
17. Disassemble the radiator (11) from the frame
assembly (7) by removing capscrews (27), washers
(28), isolators (29) and frame brackets (30).
18. Remove the radiator overflow tank (31) by
disconnecting the hose (32) from the radiator (11)
filler neck, and removing the locknuts (33),
washers (34) and hose clip (35).
b. Oil Coolers and Radiator Installation
Note: ALWAYS replace elastic locknuts with new elastic
locknuts to help ensure proper fastening.
1. Install the radiator overflow tank (31) by connecting
the hose (32) to the radiator (11) filler neck, and
installing the locknuts (33), washers (34) and hose
clip (35).
2. Assemble the radiator (11) to the frame assembly (7)
by installing capscrews (27), washers (28), isolators
(29) and frame brackets (30).
3. Assemble the hydraulic oil cooler (10) to the frame
assembly (7) by installing capscrews (25) and
washers (26).
4. Assemble the fan shroud spacer (9), to the frame
assembly (7) by installing capscrews (23) and
washers (24).
5. Assemble the fan shroud (8) to the fan shroud
spacer (9), by installing capscrews (18 and 19),
lockwasher (20) and washers (21 and 22).
6. Install the fan shroud (8), fan shroud spacer (9),
hydraulic oil cooler (10), frame assembly (7) and
radiator (11) as a unit, by installing capscrews
(12 and 13), washers (14 and 15), isolators (16)
and locknuts (17).
7. Working at the back of vehicle, install the capscrews
(1) and lockwashers (2) that secure the transmission
oil cooler (3) to the hinges (4), and the capscrews (5)
and washers (6) securing the other side of the
transmission oil cooler to the weldnuts on the
frame assembly (7).