SkyTrak 8042 Service Manual User Manual

Page 880

Advertising
background image

10.39

Model 8042, 10042, 10054 Legacy

Rev. 10/03

Stabil-TRAK™ System and Boom Interlock System

10.12.4

Hydraulic Troubleshooting - FREE PIVOT Mode, Rod Oil Out

Not

OK

Not

OK

Not

OK

When frame swaying right, left front

tire comes off the ground

Conditions:

• Ignition ON, engine

running

• Boom angle is

below 40°

• Travel select

lever in (F)
FORWARD or
(R) REVERSE

• Park brake OFF

• Service brake

DISENGAGED

Check solenoid coils 12A and 12B on

the Stabil-TRAK™ manifold for correct

resistance (7-9 ohms).

Remove solenoid cartridges 12A and 12B

from Stabil-TRAK™ manifold and inspect

for debris or damage. Refer to Section

8.13.9, “Stabil-TRAK Cylinder.”

Replace solenoid(s).

Clean passages or replace cartridge(s).

If OK

If OK

If OK

Not

OK

Replace check valve(s).

Inspect check valves on frame sway

cylinder. Refer to Section 8.13.8, “Frame

Sway Cylinder.”

Check electrical wiring.

Refer to Section 10.7, “Stabil-TRAK™

Electrical Circuit Operation and

Troubleshooting (8042/10042),” Section

10.9, “Stabil-TRAK™ Boom Interlock

Electrical Circuit Operation and

Troubleshooting (10054, 13198-17984),”

or Section 10.10, “Stabil-TRAK™ Boom

Interlock Electrical Circuit Operation and

Troubleshooting (10054, 17985-19987

and 0160002332 & After).”

Advertising
This manual is related to the following products: