SkyTrak 8042 Service Manual - Manual (Page 57)

General Information and Specifications
2.32 Model 8042, 10042, 10054 Legacy Rev. 10/03
2.6.10 Paint
Unless otherwise specified, paint components as
indicated in the following sections.
a. Orange Paint
Durable, premium Sky Trak Orange paint is available in
both a convenient 16 ounce (480 ml) spray can for touch-
ups and in a production size, one gallon (3,8 liter)
container for extensive repainting. Consult the appropriate
parts manual for the applicable part number and ordering
information. Use orange paint on all vehicle components
except as specified in paragraphs 2.6.10 B and C.
b. Black Paint
Durable, premium Sky Trak Black paint is available in
both a convenient 16 oz (480 ml) spray can for touch-ups
and in a production size, one gallon (3,8 liter) container
for extensive repainting. The following components are
painted Black:
• Boom Angle Indicator Pointer
• Brake Pedal
• Radiator
• Radiator Shroud
• Oil Cooler
• Axles
• Drive Shafts
• Transmission
• Forks
• Quick Attach (Current Production)
• Carriages (Current Production, refer to appropri-
ate Parts Manual for correct paint part number)
• Mirrors and Mirror Brackets
• Air Cleaner (4BT3.9 & 4BTA3.9 Engine Only)
• Steering Column
• Outriggers (10042 and 10054)
• Outrigger Cylinders (10042 and 10054)
c. White Paint
Durable, premium Sky Trak White paint is available in
both a convenient 16 oz (480 ml) spray can for touch-ups
and in a production size, one gallon (3,8 liter) container
for extensive repainting. The following components are
painted White:
• Boom Extend Cylinder
• Wheels
2.6.11 Thread Locking Compound
For general thread locking purposes, Loctite ® products,
manufactured by Loctite Corporation, are recommended.
Contact:
LOCTITE Corporation
1001 Trout Brook Crossing
Rocky Hill, CT 06067 USA
Phone: 1-800-LOCTITE (1-800-562-8483)
Fax: (860) 571-2460
Internet: http://www.loctite.com
LOCTITE
®
is a registered trademark of Loctite
Corporation.
2.7 CLEANING
Dirt and abrasive dust reduce the efficient working life of
parts and systems and lead to the costly replacement of
components. To help increase the service life of parts,
clean the exterior of all parts before beginning any
repairs.
Use cleaning fluids and solvents suitable for cleaning
parts that do not create safety hazards. Certain types of
cleaning fluid can cause skin irritation and can damage
components (such as rubber, electrical parts, etc.).
Servicing the hydraulic system in particular requires
cleanliness of the work area, as well as the components
on the vehicle.
Follow these suggestions before attempting to service
any hydraulic component:
1. Flush hose and tube assemblies with a solvent
compatible with hose materials. Blow excess solvent
away with shop air.
2. Plug or cap hydraulic fittings, hoses and tube
assemblies, and protect the threads until time of
installation. Clean up any spilled hydraulic fluid
immediately.
3. Flush the hydraulic oil reservoir or fuel tank with a
suitable solvent to remove paint, metal chips, etc.
4. Protect hydraulic system components from airborne
contaminants. Plug or cap all cylinder, valve,
reservoir, tank and pump openings until time of
installation.
5. Use clean, filtered oil when filling the system.
Maintain the hydraulic system at a minimum
cleanliness level of ISO code 18/15-particle ration
count.