SkyTrak 8042 Service Manual - Manual (Page 855)

Stabil-TRAK™ System and Boom Interlock System
10.14 Model 8042, 10042, 10054 Legacy Rev. 10/03
10.5 BOOM EXTEND INTERLOCK
SYSTEM DESCRIPTION
Note: The boom interlock system is used only on the
Model 10054.
The boom extend interlock system is designed to provide
additional stability, allowing the boom to be extended to
its maximum limits. The appropriate owners/operators
manual contains boom extend interlock basic
information. A copy of the owners/operators manual
should always be available in the storage compartment
located on the cab frame, behind and to the left of the
operator's seat.
The interlock system operates via an interface between the
outrigger pressure switches (1), boom extend sensor (2),
boom lockout valve (3) and the logic wiring harness.
The boom extend interlock system can only be activated
when both outriggers are lowered onto firm terrain. Once
the boom extend interlock system has been activated, the
vehicle will automatically place the Stabil-TRAK™
system in the LOCKED MODE. The Stabil-TRAK™
system will remain in the LOCKED MODE, until the boom
has been retracted. (Refer to Section 10.4, “Stabil-
TRAK™ Operation,” for more information.)
MH3010
1
MH2950
2
MH4100
~
3