4 performance specifications, 5 hydraulic cylinder performance specifications, Performance specifications – SkyTrak 8042 Service Manual User Manual

Page 45: Hydraulic cylinder performance specifications

Advertising
background image

General Information and Specifications

2.20

Model 8042, 10042, 10054 Legacy

Rev. 10/03

2.5.4

Performance Specifications

Note: Performance criteria is based on full throttle engine speed unless otherwise specified or not applicable.

2.5.5

Hydraulic Cylinder Performance Specifications

Note: Vehicle with no load, engine at full throttle, hydraulic oil above 130° F (54° C) minimum, engine at operating
temperature.

Travel Speed (Standard Tires, No Load)

All Models

First Gear

0-3.5 mph (0-5,6 km/hr)

Second Gear

0-6 mph (0-9,7 km/hr)

Third Gear

0-14 mph (0-21,7 km/hr)

Fourth Gear

0-20 mph (0-32,2 km/hr)

Function

Approximate Times, in Seconds

8042

10042

10054

Boom Extend

Less than 19.0

Less than 19.0

Less than 19.0

Boom Retract

Less than 17.0

Less than 17.0

Less than 17.0

Boom Lift Retracted

Less than 17.5

Less than 17.5

Less than 17.5

Boom Lower Retracted

Less than 15.5

Less than 15.5

Less than 15.5

Attachment Tilt - UP

Less than 8.0

Less than 8.0

Less than 8.0

Attachment Tilt - DOWN

Less than 11.0

Less than 11.0

Less than 11.0

Frame Sway Left to Right with Boom
Down

5.5-12.0

5.5-12.0

3-6

Frame Sway Left to Right with Boom
Above 40

°

and Emergency Brake

Engaged

23.0-33.0

23.0-33.0

23.0-33.0

Frame Sway Right to Left with Boom
Down

4.0-8.0

4.0-8.0

4.0-8.0

Frame Sway Right to Left with Boom
Above 40

°

and Emergency Brake

Engaged

26.0-52.0

26.0-52.0

26.0-52.0

Outrigger - Left or Right, UP or DOWN

4.0-9.0

4.0-9.0

Outrigger - Left and Right, UP or DOWN

4.0-10.0

4.0-10.0

Advertising
This manual is related to the following products: