IPitomy IP1100+ PBX Administrator Guide - Manual (Page 167)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 149 v4.0.1
www.ipitomy.com
Trunks
None should be added, as without a trunk to dial out, any 1-900 number
will be dead in the system.
Table 53 – Block 1900 Outbound Call Configuration
Configure Least Cost Routing Subroutes
In this example, the end user has multiple providers in different regions, and wants dialed calls to use the most
cost effective trunk when dialing out. The default 1+ (11 Digit) dialing route has Subroute Offset = 1 (ignores the
first digit dialed, this case being the 1 for a long distance number) and Subroute Digits = 3 (after ignoring the first
digit from subroute offset, this reads the next 3 digits (area code) in the dialed string and compares them to any
subroutes created). The subroute that will be built specifically routes calls dialed to the 941 area code through a
different, more cost efficient trunk.
Figure 79 – Least Cost Routing Example
Sections/Fields Description
Route Name
Enter a meaningful name for the outbound route. In this case you may
want to call it “Sarasota Subroute”.
Route Type
Select the 1+ Dialing as the route type, as this will be a subroute of that
dialing route.