Ip addresses – IPitomy IP1100+ PBX Administrator Guide User Manual
Page 33
IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
15
v4.0.1
www.ipitomy.com
IP Addresses
To determine the IP address that can be used on the network, check the router or get this information from the
Network Administrator. In many cases, this default IP address will be acceptable without any router configuration
other than port forwarding (required for remote administration and remote telephones).
!
IMPORTANT:
The IP PBX is required to have a fixed (static) IP
address. The system comes with a default static IP address of
192.168.1.249/ippbx.
We recommend that you use this default IP address. Please contact
IPitomy’s Technical Support Group if you need further assistance
by email at
or phone 941-306-2200 option2,
or visit our FAQ page at our website at
www.ipitomy.com
.
Changing the IP Address
If the default IP address does not match the network schema for your install, the PBX has a simple method for
changing this information. The Network Console allows you to view and change settings without requiring an
external web browser or any network connection.
STEPS:
1
Plug a keyboard and monitor into the IP PBX.
2
From this keyboard, press CTRL-ALT-F7
3
Follow the instructions displayed on the page to configure the IPs for the PBX. The options
used are as follows.
1: Network Type – Static or DHCP
2: IP address
3: Subnet Mask
4: Default Gateway
5: Static DNS
6: Static DNS 2
7: Static DNS 3
R: Refresh View
D: Default Settings
S: Save & Update
4
Once all values have been configured to match the install network, choose S to save
and update.
Note: For further details on using the Net Console, please refer to Appendix 6.