IPitomy IP1100+ PBX Administrator Guide - Manual (Page 53)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 35 v4.0.1
www.ipitomy.com
Figure 22 – Add/Edit Hardware Provider Configuration Page
4 Edit the necessary parameters. Required fields are: Group Name, Signalling Type, Start
Channel, and End Channel. The rest of the fields can be configured as needed, or left at
their defaults. (refer to the table below for descriptions and recommended settings)
5 Click on the button.
6 Click the Apply Changes link located on the right hand corner of the page to commit the
changes to the database.
7 Once the changes are applied, navigate to the Hardware Providers page and click the
Restart USB and PBX Services button.