IPitomy IP1100+ PBX Administrator Guide - Manual (Page 236)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 218 v4.0.1
www.ipitomy.com
Fwd Gateway
This takes the user to a gateway that allows them to control forwarding for
extensions other than their own. User will be prompted for an extension number
and password (PIN) before they can make changes. Once logged in, you can
enable, disable, and set the forward destination. To manually configure, log into the
phone and set the key to:
Type: Speed dial
Label: Fwd Gateway
Value: *9
Intercom
This key starts the intercom process and allows you to enter an extension or group
number. Once entered, press Dial or wait for the digit timeout, and the page will
happen. To manually configure, log into the phone and set the key to:
Type: Intercom
Label: Intercom
Pause
Similar to the DND key, except pressing this key communicates to the PBX, and will
pause you out of call queues. The key is a BLF and will lamp when the phone is
paused. To manually configure, log into the phone and set the key to:
Type: BLF
Label: Pause
Value: ABC<extnum>
Line: 1
Day/Night BLF
When pressed, a call is established to the PBX telling the user the state of
Day/Night mode override, and gives instructions on how to change the settings. If
Day/Night mode is forced into night mode, the light will blink; and if forced into day
mode, the light will be solid. If Day/Night mode is following the schedule the BLF will
not lamp. To manually configure, log into the phone and set the key to:
Type: BLF
Label: Day/Night
Value: ff
Line: 1
Page BLF
Allows BLF monitoring of an extension, as well as one press paging to that
extension. TO manually configure, log into the phone and set the key to:
Type: BLF
Label: Meaningful Descriptor
Value: **<extnum>
Line: 1