IPitomy IP1100+ PBX Administrator Guide - Manual (Page 243)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 225 v4.0.1
www.ipitomy.com
Changing a Forwarding Number from a PC
STEPS:
1 Browse to the Smart Personal Console page.
2 Login.
3 Select a Destination for the chosen forward type.
4 Enter the telephone number.
Changing a Forwarding Number While Away from an Extension
Only unconditional forwarding can be changed from a touch-tone keypad.
When it is necessary to modify the forwarding setting while away from the office, the IPitomy IP PBX has a
forwarding application built into the system. It is necessary to have an automated attendant menu accessible from
outside the system. The forwarding gateway is selectable as an option from the Smart Personal Console. When
away from the office, it is possible to call into the Automated Attendant, enter the digit setup to be the forwarding
gateway. Here users can turn forwarding on or off and enter a different number to forward calls to.
STEPS:
1 Call into the Automated Attendant menu.
2 Select the touch-tone digit that has been set for modifying forwarding settings.
3 The system will prompt for an Extension Number and Password.
4 The system will indicate if extension forwarding is Enabled or Disabled.
5 Pressing “1” toggles between Enabled and Disabled.
6 Pressing “2” allows the forwarding destination to be modified.
Advanced Settings
Network Settings
When installing a Softphone change the SIP Password in Network Settings to match the password created in the
Softphone Account Settings. The rest of these settings represent service provider permissions and identification
information. These other system (extension) defaults should not be changed.