IPitomy IP1100+ PBX Administrator Guide - Manual (Page 91)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 73 v4.0.1
www.ipitomy.com
The following table describes the status of devices that will appear once an Auto-Discovery scan is completed.
Sections/ Fields Description
Assigned
This field indicates that extension that is assigned to the device (phones). Clicking
on the box to the left of this field allows you to select it for editing.
Device
The Device column lists info about the device. Database info is preferred, so if a
device is set to a certain phone type in the database, this is listed instead of the
actual device type.
Status
This is the status of the device. If the status field is blank, this indicates that the
device was not found on the network.
NOTE: Phones that are in the process of restarting, turned-off, or operating on a different
network during a network scan will not be in an “Online” status.
Hovering the mouse over this icon will provide device information. See Figure 43 for
an example of the data that can be viewed.
MAC Address
This is the MAC Address assigned to the device.
IP Address
This is the IP Address assigned to the device.
Table 24 – Auto-Discovery Scan Details
Device Information
To view detail information for a specific device, hover your cursor over the information icon to obtain details
about the network device or phone. This can be an important source of information about which phones are
available for live configuration.
Figure 41 – Auto- Discovery Device Values