IPitomy IP1100+ PBX Administrator Guide User Manual
Page 43
IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
25
v4.0.1
www.ipitomy.com
Table 8 – Web Server Features and Descriptions
!
IMPORTANT:
Changes to the Web Server Access List are
preconfigured. They are database independent so custom changes
do not migrate from one box to another via a database backup file.
Please contact IPitomy’s Technical Support Group if you think you
need to modify these settings. Email via
or
phone at 941-306-2200 option 2. You can also visit our FAQ page at
faq.ipitomy.com.
Add New Permission
STEPS:
1
Navigate to System
Access Control
2
Click on the Web Server button located at the top of the page. The Web Server
Configuration page appears.
3
In the Add a New Item section, enter the network or domain you want to allow to access
the PBX web server
4
Click the ADD button.
5
The new permission rule will be displayed under Allow Access From window above
6
Click on the Restart Web Server button.
7
Click OK when prompted to confirm you wish to restart the Web Server
8
A “Please Standby” message appears. Once the reboot process is completed you will
be returned to the Web Server Configuration page.
Load Factory Default
This feature allows you to restore the manufacturer’s factory default settings. It will restore the settings to the
factory recommended defaults.
STEPS:
1
From the Web Server page, click Load Factory Default button. This will return or
restores the Allow Access From list back to the manufacturer’s default setting.
2
Once the changes applied, you will need to restart the web server. Please refer to the
Restart Web Server topic of this user guide for steps on how to restart the server.
3
Click on the Restart Web Server button.
4
Click OK when prompted to confirm you wish to restart the Web Server