IPitomy IP1100+ PBX Administrator Guide User Manual
Page 93
IPitomy IP PBX Admin Guide
2011 Copyright IPitomy Communication, LLC
75
v4.0.1
www.ipitomy.com
STEPS:
1
From the Extensions
Destinations
Auto-Discovery page, click the Edit Selected
tab.
2
Place a check mark next to the phones you wish to use when creating the extensions
3
Click the Create button.
4
Enter the new extension information. The MAC addresses of the selected phones will be
populated so you have a reference as to what phones you are creating the extensions
for.
5
Click the “Create” button. If successful, Click “Return to Extensions”
6
Click the Apply Changes link located at the right hand corner of the top of the page, to
commit the changes to the database.
7
Click the “Auto-Discovery” button and you will note the newly created extensions are
now assigned to the phones that were checked.
8
Check the boxes next to the phones that you just created extensions for.
9
Click the Commands Tab.
10 Click on the Configure & Restart button to provision the phones.
View Settings Tab
Filtering does not change how the network scanning is performed. It only limits the list of items displayed. This
means that if you only want to change filters it is not necessary to re-scan the network. All of the network
information from the last network scan is retained and used by filters.
Figure 43 – Auto-Discovery View Settings Page