IPitomy IP1100+ PBX Administrator Guide - Manual (Page 247)

IPitomy IP PBX Admin Guide
Menus
• Each menu screen contains 4 sections:
• Menu Location.
• “Using” (Live) System Settings.
• Database Settings.
• Commands.
Menu Location
The location “bar” tells you where in the configuration system you are. For example, the Main Menu is
“IPitomy Networking – TCP/IP Settings”. Another menu is “IPitomy Networking – TCP/IP Settings –
Subnet Mask”
Using the “Live” System Settings
This section always contains the current network system information.
Database Settings
Most values in this section are IP Addresses. The values can be edited. To edit a value you first select the
corresponding option. Options here are always numbered. Edits do not modify actual network settings until you
“Save & Update”.
Command Options
To issue a command select the desired option. Which options are available vary depending on where you are
within the menu system. Some important options are:
Refresh View [R]
• When to use:
• Undo edits you do not wish to save.
• See the latest live network information.
• See if the database has been modified by someone else.
Default Settings [D]
Changes the values listed in the menu to factory defaults. Remember, you must save your changes to actually
update your network interface.
Save & Update [S]
Save settings and update network connections.
Disable [Z]
IP address values can be disabled with this option.