IPitomy IP1100+ PBX Administrator Guide - Manual (Page 79)

IPitomy IP PBX Admin Guide
2011 Copyright  IPitomy Communication, LLC 61 v4.0.1
www.ipitomy.com
Sections/Fields Description
SIP Password
Password for the user to access IP PBX web-based administration system. Use a
combination of uppercase letters, lowercase letters, and numbers.
Generate If clicked, the system will automatically generate a password for the extension.
Password
Strength
This color code bar indicates the strength of the password being assigned for the
extension. The strengths are represented with the following colors:
Location
This allows the user to tell the PBX whether to expect this extension to register as a
local extension (LAN) or as a remote extension (WAN).
NAT !
IMPORTANT: This setting should be ENABLED (checked)
unless otherwise instructed. Please contact an IPitomy’s
Technical Support Group for assistance or more
information.
HOST
!
IMPORTANT: This should be set to DYNAMIC unless
otherwise instructed. Please contact IPitomy’s Technical
Support Group for assistance.
Phone Type
The phone type is a drop down list for selecting which IP phone hardware is being
used on the extension. IPitomy supports Aastra
 phones as well as our own IP550
and IP120 phones, and will be adding additional phone types in the future. When the
phone type is selected, another configuration option is available to program the
button mapping of each telephone model. The IPitomy IP PBX supports a variety of
pre-programmed buttons like BLF, park, voicemail, as well as custom configurable
speed dial buttons. Each phone can be configured for its own unique set of buttons.
Phone MAC
All of the IP phones have a MAC Address. The MAC ID identifies the piece of
equipment for configuration. The auto configuration features of IPitomy rely on the
MAC address to load the proper configuration files into the telephone when changes
are made in the Web-based interface. The configuration files are stored on the
IPitomy IP PBX and used when the phone powers back on after a power down cycle.
If the configuration files have been updated when the phone powers back on, a new
configuration is loaded into the phone. When the new configuration file is loaded,
manual settings on the phone take priority and will be kept intact during the upgrade.
Note that at this time only Aastra
 phones require and utilize the MAC address in the
phone settings.
Qualify
This is the interval of time between checking registration for the phone. Default is
set to 8000 and should not be changed unless instructed by an IPitomy
representative.